Description
Features
EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behavior and inter layer adhesion make EasyFil PLA an extremely easy to print filament.
Very easy to print, Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
Slightly softer than standard PLA resulting in improved strength and impact resistance
Almost odorless processing/printing
Biodegradable
Specifications
General printing guidelines
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100% |
Print temp: ± 180 – 220° C | Print speed: Medium | Retraction: Yes – 5mm |
Heat bed: ± 0 – 65° C | Fan speed: 50-100% | Experience level: Beginner |
Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.24g/cc | 50 gr coil | 0.75 Kg spool |
Ø 1.75mm | ± 16.8m | ± 251m |
Ø 2.85mm | ± 6.3m | ± 95m |
Abrasiveness
Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature. In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Product export information
HS Code: 39169090
Description: Monofilament
Country of origin: the Netherlands
Package Content
1x PLA Filament EasyFil PLA 1.75mm Glow in the Dark Green 750 gram 3D Printer Filament
